VIP | Autel MaxiSys Ultra

2021 TOP SCANNER, AUTEL MAXISYS ULTRA
TOP SCANNER - AUTEL MAXISYS ULTRA

Autel MaxiSys Ultra, Maximize Your Intelligence

MaxiSys Ultra is Autel’s most ambitious diagnostics tablet designed to maximize technician intelligence. It features a 12.9-inch touchscreen tablet with Android 7.0 OS powered by an Octa-core processor (2.3GHz Quad + 1.7GHz Quad), substantial 256GB built-in memory, all powering the new split-screen multi-application navigation to provide diagnostic guidance and test components to confirm repairs. Combined with the dynamic topology module mapping, enhanced AutoSCAN features and Intelligent Diagnostics options, the Ultra offers the technicians step-by-step repair guidance. The new MaxiFlash VCMI functions as a 4-channel oscilloscope, waveform generator, multimeter, and CAN BUS tester. The convenient docking station featured ensures you always have the power to scan. As the top-end diagnostic scanner in 2021, Autel MaxiSys Ultra is equipped with all functions that you may need to be a professional mechanic.

Updated version of MK908P/MS908P/Elite/MS909/MS919; All-in-one comprehensive scanner for large repair workshops;
D-PDU/SAE J2534/RP1210/DoIP/CAN FD protocols are supported; Wider vehicle coverage for 99.99% makes in the market;
5-in-1 VCMI with functions of VCI, oscilloscope, waveform generator, multimeter, and CAN BUS tester;
Advanced Programming and Coding, ECU upgrading & downgrading, ECU module matching & replacement, etc.
36+ service functions to fix all car-related problems, no need to turn to other scan tool or gurus;
One-stop Intelligent Diagnosis based on DTCs, helping you have a clear picture of vehicle status; the Ultra features the TSB, repair tips, DTC analysis, etc. For each fault code, Ultra performs in-depth analysis and gives the OE data and processing suggestions.
OE-level Topology Module Tree, helping you veiwing the vehicle's crux much more intuitively;
Split-screen multi-application navigation with super fast running speed, greatly improving your work efficiency;
10+ highly advanced functions: Active Test/Guided Functions/Personalization/Modification/ etc.;
Multiple repair guidance: Technical Service Bulletin (TSB), DTC Analysis, Repair Assist, Repair Tips, Component Measurement, and Relevant Cases.
Maxisys Ultra OE-level Topology Module Tree
Top-level Configurations, OE-level Topology Module Tree
Autel MaxiSys Ultra Specifications:

1) Processor: 2.3GHz Quad + 1.7GHz Quad

2)Battery: 18000mAh for 10hrs Continuous Use

3) Memory: 256GB SSD/4GB RAM

4)OBD Interface: CAN, EOBD, OBD, OBDII

5) Protocols: KPW, CAN, CAN-FD, DoIP, etc,

6)Screen: 12.9 Inch Touchscreen

7) Camera: 16MP REAR/5MP FRONT

8)Connectivity: Wifi Bluetooth, MaxiFlash VCMI

9) Coverage: for 99.999% Car Makes like Ford Toyota Nissan GM BMW Benz,etc.

10) Supported System: All Systems like ABS, DPF, EPB, SAS, SRS, TPMS, IMMO

11) Accessories: Adapter Cable, Carrying Case, USB Cable, User Guide, MaxiFlash VCMI

The new Topology Module Listing CAN BUS Tree, specially designed for the OEM diagnostic tools, shows all available control units of the test vehicle in different colors, helping users get to know the numbers of systems, the scanned systems, and the scan results at a glance.

Intuitively display the current module status (includes whether there’s a DTC in a specific module, and the number of DTCs);
Systematically show the communication structure between the modules;
Directly display the fault code and enter the system execution function;
Clearly view the color coded module status tree by zooming in and out;
Compatible with BMW, Ford, Audi, Chrysler, Nissan, Honda, Toyota, Lexus, Land Rover, Jaguar, Benz, VW, etc.
autel maxisys ultra
Intelligent Diagnostics, One-Stop Solution for DTCs
Intelligent Diagnostics provides smart shortcuts for technicians to get information directly related to the fault code, rather than that isn’t relevant, helping technicians repair detected faults efficiently, making repair work 200% easier than ever.

One-Stop Solution to Guide Customers to Solve the Faults Step by Step

Vehicle System and Detected DTC: displays the name of the vehicle system(s) and the detected DTC(s)
Technical Service Bulletin (OEM Info): contains DTC-related recalls, TSB, and OEM campaigns.
DTC Analysis: provides repair assistance information related to the fault code.
Repair Assist: intelligently prioritizes DTCs and leads the user to the proper repair.
Repair Tips: step by step guidance to efficiently to solve multiple faults
Component Measurement: provides detailed information and instructional guides on using the oscilloscope to test components for faults.
Relevant Case: offers relevant fault-clearing cases for reference.
Compatible with: BMW, Ford, Audi, Chrysler, Nissan, Honda, Toyota, Lexus, Land Rover, Jaguar, Mercedes-Benz, VW, etc.
5-in-1 VCMI, Diagnose & Program Vehicles More Efficiently

5-in-1: Except working as a diagnostic tool, it also functions as a 4-channel oscilloscope, waveform generator, multimeter, and CAN BUS tester.
More Advanced than J2534: With the 3 diagnostic protocols (D-PDU/SAE J2534/RP1210), Ultra can work with more OEM diagnostic tools and diagnose & program more vehicles than J2534 programming tools.
maxisys ultra ecu programming
Advanced ECU Programming & Coding
The need to perform programming & coding services is now more relevant in the aftermarket than ever. There are more and more instances where programming/coding is necessary, e.g., replacing a module, replacing the existing software or firmware in the ECUs, fixing software-controlled drivability issues and emission issues, etc. There are two general types of programming operations:

A. Coding--also known as Teach-in Program, or Component Adaptation, is used to reprogram adaptive data for vehicle control modules after repairs or replacements of vehicle parts.

B. Programming --downloads the latest version of software from the online server database through Internet access (this procedure is done automatically when the tablet is connected to the Internet, so there is no need to check for software updates yourself), and reprograms the newest version into the vehicle's ECU.

Autel MaxiSys Ultra with VCMI can help you solve all above issues. With D-PDU, SAE J2534 & RP1210 protocols, Auto scan tool Maxisys Ultra provides diagnosing, coding, and programming for more passenger and commercial vehicles, much more advanced than J2534 programming tools.

Online ECU programming & coding without any special connectors for BMW (F & G chassis);
Online ECU programming for new chassis of Benz (204, 212, 207, 463, etc.); Online SCN for Benz (222, 212, 204, 205, etc.);
Online ECU coding for Volkswagen, Audi, Porsche, Renault, etc.
ECU programming & coding for GM, Ford, Chrysler, Volvo, Land Rover, Jaguar, etc.
The VCMI module also supports various common vehicle buses protocols, for instance: KPW, CAN, CAN-FD, DoIP, etc. Speaking of the CAN-FD, its transmission speed is 14 times faster than CAN.
autel ultra 36+ maintenance functions
36+ Maintenance Functions Greatly Improve Work Efficiency
26 Commonly Used Reset Functions for Fast Maintenance or Repairs:
Oil Reset, EPB, BMS, ABS Bleed, TPMS, Airbag Reset, DPF Reg., IMMO Service, Injector Coding, SAS Calibration, Suspension Calibration, Throttle Adaption, ABS/SRS, Gear Learning, Sunroof Initialization, Seats Calibration, Language Change, Headlight Matching, A/F Setting, WIN DR Roof, Odometer, CHG Tire Size, Cylinder, Turbocharging, Limit, Trans Adaption.
10+ Advanced Functions for Different Vehicle Models:
Neutral Gear Position Learning, Torque Sensor Adjustment, Signal Check, Yaw Rate Sensor (YRS) Learn, Clutch Pedal Position Learn, Cylinder Power Balance, Component Matching, Stop/Start Reset, Transport Mode, Auto-Door Lock, etc.
Oil Reset, to reset the oil service lamp for the engine oil life system; EPB Reset, to reset the brake pad after replacing the brake pad.
ABS Bleeding, to perform various bi-directional tests of Anti-lock Braking System;
Injector Coding, to write the new code to the ECU after replacement of injector.
Suspension Calibration, to adjust the height of the body; SAS Calibration, to calibrate the steering angle after replacement.
Anti-theft Matching, to disable the lost key and add the new key’s data for security.
BMS Reset, to perform a resetting operation on the monitoring unit of the vehicle battery.
Tire Pressure Reset, to look up the tire sensor IDs, reset tire pressure, and turn off the tire pressure MIL.
DPF Reset, to retrieve/erase DPF-related codes, and reset the DPF light.
Throttle Matching, to make initial settings to throttle actuators.
Gearbox Matching, to achieve a more comfortable and ideal shift quality.
WIN DR ROOF, Seats, Odometer, Lang Change, Headlamp, CHG Tire Size, TEC Learn, Cylinder, Trans Adaption, Airbag Reset, etc., and are still growing.
10+ Highly Advanced Features

10+ Highly Advanced Features

Bi-Directional Control (Active Test)
Accurately figure out whether a specific system, component, or a subsystem in vehicles goes well and locate the problem by interactively operating and testing the vehicle’s related actuators; Compatible with most vehicle models on the market.

Modifications
To improve car performance and enhance your experience as a driver or owner, you can change or add the functions by changing or adding certain modules that haven’t already in your vehicle, such as adding a satellite navigation system, courtesy lamps, car phone, parking sensors, atmosphere lights, etc.；Compatible with Volkswagen, Audi, BMW, etc.

Guided Functions
Come with the on-screen instructions to guide you on how to complete some complicated functions step by step; Compatible with Volkswagen, Audi, Skoda, Seat, etc.

Personalization
Customize your car as you want. Help you make full use of the hidden functions and disable the annoying features; Available for BMW, Porsche, Toyota, Nissan, Peugeot, Citroen, Fiat, etc.

Vehicle Coverage

Worldwide Vehicle Coverage

Thanks to MaxiSys Ultra’s mighty compatibility with D-PDU, J2534 and RP1210 interface standards, so it can conduct more diagnosis and programming for passenger cars and CVs comparing with other best-selling tablet scanners in the US market. It supports the OE software of Volvo, Land Rover, VW, Mercedes, and over 20 CV models.

Through years of accumulated market experience, we have included a total of more than 80 manufacturers and 140 vehicle models in vehicle coverage database. Such as Ford, GM, Chrysler, Toyota, Honda, Hyundai, Mazda, Lexus, VW, Audi, Volvo, Fiat, Porsche, Renault, Benz, BMW, Subaru, Acura, etc.

Autel Maxisys Ultra vs MS919 & MS909:

Maxisys Ultra vs MS919 vs MS909

Autel MaxiSys Ultra Packing List:
Main Unit
MaxiFlash VCMI
Docking Station
Main Cable V2.0
USB 2.0 Cable V2
AC/DC Adapter(12V)
Cigarette Lighter
Light Fuse 6x30mm 2 PCS
Clipper Cable
Scope Test Lead 4 PCS
Multimeter Test Lead 2 PCS
Secondar Ignition Pickup 2 PCS
Attenuator 20:1 2 PCS
Breakout Lead 4×6 PCS
Multimeter Probe 1×2 PCS
Flexible Back-pinning Probe 2×2 PCS
Back-pinning Probe-Red/Green/Blue/Yellow/Black 1×5 PCS
Back-pinning Probe Screw 2 PCS
Back-pinning Probe Replacement Needle 20 PCS
Small Crocodile Clip 2X2 PCS
Large Dolphin Clip 1X2 PCS
Quick Reference Guide
Packing List
Soft Cloth
Tool Box 177×102.5×23.5mm
Carrying Case 687x170x470mm

Free Autel MaxiSys MSOAK

MSOAK

Oscilloscope Accessory Kit
The MSOAK, compatible with the MaxiFlash VCMI included with the MS Ultra and MS919, and the MP408 4-channel oscilloscope (sold separately), includes the 65A AC/DC Current Clamp, 650A AC/DC Current Clamp, Coil On Plug Probe, HT Extension Lead (2pcs) and Battery Clip (2pcs), within a blow-molded carrying case. To enable screen reader support, press Ctrl+Alt+Z To learn about keyboard shortcuts, press Ctrl+slash.

Free Autel MaxiVideo MV480

MV480

The MaxiVideo MV480, the next generation of digital videoscope, is ideal for inspecting difficult-to-reach areas with its semi-rigid flexible cable and 10-level adjustable LED light. It features dual front and side cameras with 1920×1080 high resolution, a 4.1" 1200×720 full color LCD display, an 8.5mm camera probe, and a built-in 2600mAh battery with up to 4 hours continuous use. This multipurpose videoscope is an economical solution to inspect machinery, facilities, and infrastructure in the safest, quickest and most cost-effective manner possible.

Free Autel MaxiVideo MV460

MV460

The MaxiVideo MV460, the next generation of digital videoscope, is ideal for inspecting difficult-to-reach areas with its semi-rigid flexible cable and 10-level adjustable LED light. It features a 1920 x 1080 high resolution camera, a 3.5-inch 640 x 480 full color LCD display, an 8.5mm camera probe, and a built-in 2600mAh battery with up to 4 hours of continuous use. This multipurpose videoscope is an economical solution to inspect machinery, facilities, and infrastructure in the safest, quickest and most cost-effective manner possible.