VIP | Launch X431 Pros Mini V3.0

1. Supports FULL system diagnosis for your car, including: Fuel system, Emission system, Transmission, Engine, Body, Power train and more.
2. Read DTCs and view live data stream before driving out, and clear DTCs by one click when malfunctions are handled.
3. Supports identifying vehicles by via vehicle’s VIN, reducing vehicle diagnostic steps and improving diagnostic efficiency
4. Supports ECU coding and anti-theft matching for most models
5. Oil Reset Service & Steering Angle Calibration & Electronic Parking Brake Reset
6. Battery Register & ABS Bleeding & Electronic Throttle Position Reset/Learn
7. Diesel Particulate Filter (DPF) Regeneration & Tire Pressure Monitor System Reset & Tooth Learning
8. You can get remote control tech support from LAUNCH tech team by sending one-click recorded videos and accurate diagnostic results to them.
9. Software one-click upgrade: When there is a new software version, the system will immediately remind you to update version.

Compared with the supper devices such as Launch X-431 V+, this diagnostic tool is more compact and portable. You are able to use this diagnostic tool to do the same functions as the V+, while the size decreased from 10.1-in to 6.98-in. The lightweight feature makes it very suitable to carry for on-site service.

LAUNCH X431 PROS MINI Supports: More than 30 special Reset functions.

• NEW RESET FUNCTION ADDED: AFS/EGR/GEARBOX/SUSPENSION/SUNROOF RESET.
• Some new functions is developing: You can give your car all-round detection with this scan tool.
• Oil Reset: Close the oil service light and reset service mileage & service interval after replacing the engine oil.
• Injector Coding: Write the new injector numbers into the ECU for accurate communication and injection control.
• EPB Reset: Reset the new electronic parking brake for braking wheels safely again.
• SAS Reset:Clear memories of the previous steering angle sensor and store the replaced one.
• TPMS Service: Relearn TPMS sensors so that new sensors can be recognized by ECU.
• ABS Brake Bleeding:Get a firm brake pad after air exhaustion.
• BMS Service: Perform a reset on the vehicle battery for clearing the fault information and re-match the battery.
• DPF Service: Clear particulate matter from the DPF filter to stabilize the filter performances
• Tooth Learning: Finish tooth learning after changing crankshaft in the car engine, so the new part can be used.
• Throttle Matching:Initialize the throttle actuators to the default state for regulating throttle (or idle engine) operations accurately.
• Anti-theft Matching:Disable the lost vehicle keys and write the key information into the replacement.